Policromado Derfel miniature painting service

Painting

Hispanic – Corvus Belli

New post to show you painted Hispanic army, level Wargame, of Corvus Belli (http://infinitythegame.com/store/es/), which now you know to be the creators of Infinity. At the beginning, the ancient range of this brand, very similar in proportion and details as Xyston (http://www.scotiagrendel.com/Xyston/) had a great impact. Personally, I think figures have a very good proportion, varied poses and very details. And the material is very good. Hope you enjoy them!


Tutorial – Painting Waterloo British Infantry Centre Company

This tutorial illustrates how to paint a miniature of British Infantry Centre Company,28mm scale, hard plastic, of Victrix Limited (http://www.victrixlimited.com/) forming part of a battalion of 26 miniatures that you can see in the 28mm section of this page. Step 1: Skin *For this tutorial we will use reference range of Model Color acrylics Vallejo. We paint the entire surface with Orange Brown (70981). Mix Orange Brown (70981) and Flat Flesh (70955) 1:1 and applied in most of the outstanding areas leaving the base color in deeper grooves. Mix Flat Flesh (70955) and Pale Sand (70837) 1:1 and apply it to the outstanding areas letting see some of the color from the previous step. We give a final touch with the brush tip with Pale Sand (70837) in the most prominent parts (nose, cheeks, chin, and knuckles). For the eyes we paint in black across the surface of the eye, then paint with Ivory (70918) inside the eyes letting see black color of the previous step on the top of the eye. Finally paint a thin black stripe inside the eye. Step 2: Jacket Paint the Jacket and the shako feather with Flat Red (70957) and Black (73602) 1:1. We add a first light with Flat Red (70957). Last light with Vermillion (70909). Step 3: Coat and Harnesses Paint coat and straps with Neutral Grey (70992). We add a first light with Sky Grey (70989) adding White (70951) to the mixture until the pure white. This step will be worth for the shako feather. For the Coat we aplly two shades mixing Neutral Grey (70992) and White (70951) adding more white to the second light. Step 4: Haversack and canteen We'll paint the bag with GlodBrown (70877). Mix GoldBrown (70877) with Ivory (70918) and aplly several times adding more Ivory to the mix. And in the end we will highlight the Haversack directly with Pale Sand(70837). Paint the canteen with Prussian Blue (70965) and give a couple of shades mixing this color with Ivory (70918). Step 5: Musket , leather and metallic Paint the wood of the Musket with a mixture of Flat Brown (70984) and Black (73602) 1:1 and the metal part with a mixture of Gunmetal Grey (70863) and Black (73602) in the same proportion. For the first add Flat Brown (70984) for wood and Gunmetal Grey (70863) for the metal. We will be adding up Orange Brown (70981) and Silver (70997) respectively atthe end. For the black leather of the backpack and shako apply one coat of Neutral Grey (70992) mixed with German Grey (70995) 1:2. For the shako plate mix Bronze (70988) and Black (73602) 1:1, first light with Bronze (70988) and second light Gold (70996). Step 6: Pants Paint the pants with a mixture of Neutral Grey (70992) and German Grey (70995) 1:1. Add more Neutral Grey (70992) to the mixture to start blending Neutral Grey (70992) with Ivory (70918) 1:1. We will apply the last light in fine lines with Sky Grey (70989). Step 7: Collar and sleeves Finally paint the collar and sleeves with the regimental color chosen, in this case a pale yellow. First apply Flat Brown (70984). First light with a mixture of Flat Brown (70984) and Deep Yellow (70915). Second light with Deep Yellow (70915); and finally Light Yellow (70949) directly. That's all, See you!


Lord Brooke’s Purple Coats [Part V]

1.Painting slate wall. After painting the miniatures we still pending painted scenery. We begin with the slate wall we created in a previous post (Preparing the base). First paint the entire wall slate in black to apply the basic colors and then rise as we see necessary. After apply German Grey (70.995) to the wall and Flat Brown (70.984) to the rest of stones. The next step is apply a dry brush of Neutral Grey (70.992) to the wall and Flat Earth (70.983) to the rest of the stones. Finally apply a dry brush of Neutral Grey (70.992) and White in 1:2 ratio, and Iraqui Sand (70.819) to the rest of the stones as long as we get the final result. 2.Painting base and placement miniatures. It's time for the preparation of the ground texture and the placement of miniatures on it. We encountered a first problem, the placement of all models prevents a comfortable placement of texture and decoration. So we have to place the figures slowly and one by one decorating and painting the base around them. Leaving some areas dry until we can continue this process. It may seem tedious, but as we make and paint the ground on one area, another opposite area can dry. The first is to apply a layer of texture Vandal and adding stones of different sizes. We will mold some of them with putty to suit pose of some miniatures. Then aplly black paint across the surface. We apply the basic colors: Citadel Brown Mournfang mixed with black 1:1 to the groung, German Grey (70.995) for the larger rocks, and Flat Brown (70.984) for smaller stones. Then the first lights. Drybrush of Beige Brown (70.875) to the groung and then another very slight of Pale Sand (70.837). Neutral Grey (70.992) for large rocks and Flat Earth (70.983) for smaller stones. And the final climb, Neutral Grey (70.992) with a 1:1 ratio mixed white for rocks and Iraqui Sand (70.819) for small stones. It doesn´t matter the final result as the ground will be covered with most varied vegetation. That's it, the next step you will see published in Diorama section of the website where you can view a complete gallery of the final result and the latest explanation of the final details, all in this link. See you!


Lord Brooke’s Purple Coats [Part IV]

1-Painting. After painting dead and wounded models, let´s continue with the rest of the unit. We apply a black primer and then Vallejo acrylic colors. Below I detail the main techniques and colors I used. 1.1-Uniforms. The predominant color is Purple (70.959) as it was the color of the uniform of our regiment. However we don´t apply this color to the entirety of the uniforms. Some jackets and pants are painted in green or brown. With this we get the feeling of the difficulties in the regiment to get new uniforms in campaign. If we add the rips in clothing that we create with putty and the patches on knees and elbows painted in a different color, we leverage these feeling. 1.2-Metal. In the metal parts of the helmets and breastplates we apply Gunmetal Grey (70.863) black lowered to 1:1. We then apply two to three washes Wash for NATO camo vehicles (AK075) intercative AK, leaving enough time to dry between washes. This effect obscure metal parts as they were at that age. After drying apply the final lights with Gunmetal Grey (70.863), and then a very light only at the tips and rivets of metal parts with Silver (70.997). 1.3-Wood. For wood on the muskets we applied Flat Brown (70.984). We then apply a wash with very dilute black to be inserted into the holes. The lights have been adding with Orange Brown (70.981). We did two coats to directly implement this last color. To the wood for cartridges that contain loads that lead the Musketeers we have applied a base of Flat Earth (70.983) mixed with black 1:1. We add more Flat Earth (70.983) to the mix for the lights to pure color and rinsing with Goldbrown (70.877) to directly implement this color. For the color of the pikes and halberds we applied English Uniform (70.921) rinsing with Beige (70.917) up to the last light with this color directly. In the following gallery you can see the final result of some of the figures that make up the diorama. Next time: based and final decoration ... see you!


Lord Brooke’s Purple Coats [Part III]

1-Adding realistic details. Progress in our English Civil War diorama and our blog adding details to the work. I decided to add a group of dead and dying to diorama to give it more authenticity. I bought a blister of dead and wounded from Warlord Miniatures and chose four different figures. All underwent a similar transformation to the rest of the miniatures of the work and added some extra details as you can see in the gallery I show below. I molded with putty several broken patches on clothing, plus bags and other similar details. I also added a plastic beret to the sitting plastic miniature and a sword in its sheath. To fit well, the two plastic parts has been retouched with putty on the joints. To the dying crawling miniature I've added a plastic feather in his hat and a broken pike in his hand. To represent the fight until the last moment, or rather self-defense. It also has added a plastic sword in its sheath. At two dead miniatures similar contributions were made by adding a small plastic feather to one of them and a sword in the other. After primed then I decided to paint and here is the final result. Soon more information about the diorama, It is almost ready ... See you!


Fotografía: Carlos Fernández
Desarrollado por Martes Web y Movilidad